BM-16 Multitask Plate & Pipe Beveler
Overview
Basic Set:
Accessories:
Spare and consumable parts:
Technical Specification
Milling head for BM-16:
BM-16 dimension:
Basic Set:
- BM-16 beveling machine without accessories (see list below)
- Metal box
- 32mm flat wrench
- Allen wrench hex s=5
- Allen wrench hex s=14
- Operator’s Manual (English)
Accessories:
- PMT-GLW-000011 – Milling head for rounding
- PMT-PLY-000159 – Cutting insert R3 (4pcs required)
- PMT-PLY-000160 – Cutting insert R4 (4pcs required)
- PMT-PLY-000161 – Cutting insert R5 (4pcs required)
- PMT-GLW-000010 – Milling head 22,5°
- PMT-GLW-000005 – Milling head 30°
- PMT-GLW-000009 – Milling head 37,5°
- PMT-GLW-000006 – Milling head 45°
- PMT-GLW-000008 – Milling head 55°
- PMT-GLW-000007 – Milling head 60°
- PMT-PLY-000162 – Cutting insert for steel (5pcs required)
- PMT-PLY-000195 – Cutting insert for aluminum (5pcs required)
Spare and consumable parts:
- PMT-SRB-000289 – Insert Screw
- PMT-SRB-000290 – Insert Screw (Radius)
- PMT-RLK-0509-03-00-00-0 – Guiding roller
- PMT-SMR-000005 – Screw grease (5 g) Carbon brush for 115 V
- Carbon brush for 230 V
Technical Specification
| Power supply | 220-240 V / 50-60 Hz or 110-120V / 60Hz |
| Motor | 2200W |
| Spindle speed (without load) | 1800–5850 rpm |
| Maximum bevel width | b=16 mm (0.63’’ Fig. 1) |
| Bevel angle (depending on milling head) | = 22.5° ; 30° ; 37.5° ; 45° ; 55° ; 60° (Fig.1) |
| Minimal diameter of countersinking | ca 40 mm (1.57’’) |
| Rounding edges | R3 ; R4 ; R5 (Fig. 2) |
| Dimensions (L x W x H) | 585 mm (23.0’’) × 156 mm (6.1’’) × 238 mm (9.4’’) 10 |
| Weight (without milling head) | kg (22 lbs) |
| Product code (220-240 VAC) | PMT-UKS-0509-10-20-00-0 |
Milling head for BM-16:
BM-16 dimension:
