HYPERTHERM Powermax105®
HYPERTHERM Powermax105® POWERMAX HAND/MACHINE AIR PLASMA  HYPERTHERM PLASMA MACHINE  HYPERTHERM PLASMA CUTTING MACHINE Johor Bahru (JB), Malaysia, Selangor, Kuala Lumpur (KL), Singapore, Indonesia, Vietnam Supplier, Suppliers, Supply, Supplies | Amcoweld (M) Sdn Bhd
hypertherm PMX105 Plasma Cutting machine

Download Files
PMX-105.pdf (136.94 KB)
Overview

Handheld or mechanized plasma system for cutting and gouging metal
 
Maximum productivity
 
  • Fast cut speeds: three times faster than oxyfuel on 12 mm (½”) mild steel.
  • Superior cut and gouge quality means less time spent on grinding and edge preparation.

Easy-to-use for cutting and gouging
 
  • Smart Sense™ technology automatically sets correct air pressure based on torch length and operating mode.
  • Handheld, straight machine and robotic torches for greater versatility and ease-of-use.
  • Wide voltage tolerance improves performance on motor generators and in low-line conditions.
  • Improved shield reduces dross buildup and enables smoother drag cutting for a better cut.

Built and tested to withstand the harshest conditions
 
  • Duramax™ torches are designed for high impact and heat-resistance.
  • SpringStart™ technology ensures consistent starting and a more reliable torch.
  • Low maintenance for maximum uptime – it keeps on going.

Low operating cost
 
  • Long consumable life for lower cost and more uptime.
  • Exclusive electrode end-of-life detection protects the torch and workpiece from damage by automatically stopping power when the electrode is overused.
  • High power efficiency lowers energy consumption.


Specifications

Input voltages CSA 200 – 600 V / 3-PH / 50/60 Hz
CE 230 – 400 V / 3-PH / 50/60 Hz
CE 400 V / 3-PH / 50/60 Hz
CCC 380 V / 3-PH / 50/60 Hz
Input current @ 16.8 kW CSA 200/208/240/480/600 V / 3-PH
58/56/49/25/22 A
CE 230/400 V / 3-PH / 50/29 A
CE 400 V / 3-PH / 28 A
CCC 380 V / 3-PH / 30 A
Output current 30 – 105 A
Rated output voltage 160 VDC
Duty cycle @ 40° C (104° F) CSA 200-600 V 70% @ 105 A / 240 V / 3-PH
80% @ 105 A / 480–600 V / 3-PH
100% @ 94 A / 480–600 V / 3-PH
100% @ 88 A / 240 V / 3-PH
CE 230-400 V 70% @ 105 A / 230 V / 3-PH
80% @ 105 A / 400 V / 3-PH
100% @ 94 A / 400 V / 3-PH
100% @ 88 A / 230 V / 3-PH
CE 400 V 80% @ 105 A / 400 V / 3-PH
100% @ 94 A / 400 V / 3-PH
CCC 380 V 80% @ 105A / 380 V / 3-PH
100% @ 94 A/ 380 V / 3-PH
Open circuit voltage (OCV) CSA (200 – 600 V) 300 VDC / CE (230 – 400 V) 288 VDC
CE (400 V) 292 VDC / CCC (380 V) 280
Dimensions with handles 592 mm (23.3'') D;
274 mm (10.8'') W;
508 mm (20.0'') H
Weight with 7.6 m (25') torch CSA 45 kg (100 lbs)
CE 45 kg (100 lbs) (230 – 400 V)
CE 41 kg (91 lbs) (400 V)
CCC 41 kg (91 lbs)
Gas supply Clean / dry / oil-free air or nitrogen
Recommended gas inlet flow rate / pressure Cutting: 217 l/min (460 scfh / 7.7 scfm) @ 5.9 bar (85 psi)
Gouging: 227 l/min (480 scfh / 8.0 scfm) @ 4.8 bar (70 psi)
Input power cable length 3 m (10')
Power supply type Inverter – IGBT

Engine-driven generator operation

Engine drive rating (kW) System output (amps) Performance (arc stretch)
30 105 Full
22.5 105 Limited
22.5 85 Full
15 85 Limited
15 65 Limited

Maximum cut speed

Material Current (amps) Metric unit
Thickness (mm)
Metric unit
Maximum cut speed¹ (mm/min)
Imperical unit
Thickness (inches)
Imperical unit
Maximum cut speed¹ (ipm)
Mild steel 45 3 6150 10 GA 205
Mild steel 105 6 6360 1/4 240
Mild steel 105 12 2580 1/2 95
Mild steel 105 20 1180 3/4 50
Mild steel 105 25 780 1 30
Mild steel 105 32 500 1-1/4 20
Stainless steel 105 6 7500 1/4 280
Stainless steel 105 12 2330 1/2 85
Stainless steel 105 20 990 3/4 42
Stainless steel 105 25 660 1 25
Aluminum 105 6 8330 1/4 330
Aluminum 105 12 3070 1/2 114
Aluminum 105 20 1470 3/4 62
Aluminum 105 25 970 1 37

¹ Maximum cut speeds are the results of Hypertherm’s laboratory testing. For optimum cut performance , actual cutting speeds may vary based on different cutting applications. Refer to the operator manual for more details.

Operating Data

Capacity Thickness Cut speed
  Handheld cut -
Recommended 1-1/4'' (32 mm) 20 ipm (500 mm/min)
  1-1/2'' (38 mm) 10 ipm (250 mm/min)
Severance 2'' (50 mm) 5 ipm (125 mm/min)
Pierce 7/8'' (22 mm)* -
  Metal removal rate Groove profile
  Gouge capacity -
  21.7 lbs. (9.8 kg) per hour .25'' (6.4 mm) D x .29'' (7.4 mm) W

Ordering Information

Standard configurations

Below are some of the most common system configurations which include a power supply , torch and work cable. Additional configurations are listed on our website.

Input voltages Handheld systems

Standard power supply

75° hand torch

7.6 m (25')
Handheld systems

Standard power supply

75° hand torch

15.2 m (50')
Handheld systems

Power supply with CPC port and selectable voltage ratio

75° hand torch

7.6 m (25')
Handheld systems

Power supply with CPC port and selectable voltage ratio

75° hand torch

15.2 m (50')
Mechanized systems

Power supply with CPC port and selectable voltage ratio

180° full-length machine torch

7.6 m (25')
Mechanized systems

Power supply with CPC port and selectable voltage ratio
180° full-length machine torch
15.2 m (50')
200 – 600 V CSA² 059374 059375 059376 059377 059378 059379
230 – 400 V CE³ 059394 059395 059396 059397 059398 059399
400 V CE³ 059414 059415 059416 059417 059418 059419
380 V CCC⁴ 059434 059435 059436 059437 059438 059439

² For use in the Americas and Asia , except China.
³ For use in countries that require CE or GOST marks.
⁴ For use in China.

Custom configurations

Power supply options

  Standard
power supply
Power supply with
CPC port and selectable voltage ratio
Power supply with CPC port / selectable
voltage ratio and serial interface port (RS-485)
200 – 600 V CSA 059370 059371 059372
230 – 400 V CE 059390 059391 059392
400 V CE 059410 059411 059412
380 V CCC 059430 059431 059432 / 059433⁵

⁵ Does not include a power cord.

 

Starter consumable kit options

  Handheld Mechanized Mechanized with ohmic retaining cap
Kit 228849 228848 228969

Component options
Cable length Torches

Hand

75°
Torches

Hand

15°
Torches

Machine

180°
Torches

Machine

Mini 180°
Torches

Robotic
45°
Torches

Robotic
90°
Torches

Robotic
180°
Work cables

Hand clamp
Work cables

C-style clamp
Work cables

Ring terminal
Control cables

Remote pendant
Control cables

CNC spade plug⁶
Control cables

CNC spade plug⁷
4.5 m (15') 059476 059481
7.6 m (25') 059473 059470 059477 059482 059464 059465 059466 223254 223287 223284 128650 228350 023206
10.7 m (35') 059478 059483
15.2 m (50') 059474 059471 059479 059484 223255 223288 223285 128651 228351 023279
22.8 m (75') 059475 059472 059480 223256 223289 223286 128652

Torch Consumable Parts

Nozzles and electrodes are available in various quantities. Contact your distributor for more information.
Consumable type Torch type Amperage Nozzle Shield/Deflector Retaining cap Electrode Swirl ring
Drag-cutting Hand 45 220941 220818 220854 220842 220857
Drag-cutting Hand 65 220819 220818 220854 220842 220857
Drag-cutting Hand 85 220816 220818 220854 220842 220857
Drag-cutting Hand 105 220990 220992 220854 220842 220994
Mechanized Machine 45 220941 220817 or 220955⁸ 220854 or 2209539⁹ 220842 220857
Mechanized Machine 65 220819 220817 or 220955⁸ 220854 or 2209539⁹ 220842 220857
Mechanized Machine 85 220816 220817 or 220955⁸ 220854 or 2209539⁹ 220842 220857
Mechanized Machine 105 220990 220993 or 220955⁸ 220854 or 2209539⁹ 220842 220994
FineCut® Hand 45 220930 220931 220854 or 220953 (ohmic) 220842 220947
FineCut® Machine 45 220930 220948 220854 or 220953 (ohmic) 220842 220994
Gouging Hand 220991 220798 220854 220842 220994
Gouging Machine 220991 220798 220854 220842 220994

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version