HYPERTHERM Powermax65®
HYPERTHERM Powermax65® POWERMAX HAND/MACHINE AIR PLASMA  HYPERTHERM PLASMA MACHINE  HYPERTHERM PLASMA CUTTING MACHINE Johor Bahru (JB), Malaysia, Selangor, Kuala Lumpur (KL), Singapore, Indonesia, Vietnam Supplier, Suppliers, Supply, Supplies | Amcoweld (M) Sdn Bhd
Powermax65®

Download Files
PMX-65.pdf (102.68 KB)
Overview

Handheld or mechanized plasma system for cutting and gouging metal
 
Key power supply advantages

 
  • Smart Sense™ technology automatically adjusts the gas pressure according to cutting mode and torch lead length for optimal performance.
  • Boost Conditioner™ circuit (on CSA models) improves performance on low‑line voltage, motor generators, and fluctuating input power.
  • FastConnect™ torches, CNC interface, and four work lead styles increase versatility for handheld and mechanized use.
  • Simplified control panel with LCD screen for easy operation.

Key torch advantages
 
  • 15° and 75° Duramax™ series hand torches enable operators to easily select the right tool for the job. The handle is more heat resistant and performs at least five times longer in high impact tests than previous torches.
  • Standard and short-barreled Duramax series machine torches allow a wide variety of mechanized applications with X-Y tables, track systems, pipe and robotic cutting systems.
  • Conical Flow™ nozzle increases arc energy density for superior cut quality with little dross.
  • Patent pending shield reduces dross buildup and enables smoother drag cutting for a better cut.


Specifications


Input voltages CSA 200 – 480 V / 1-PH / 50/60 Hz
200 – 600 V / 3-PH / 50/60 Hz
CE 400 V / 3-PH / 50/60 Hz
Input current @ 9 kW CSA 200/208/240/480 V / 1-PH
52/50/44/22 A
200/208/240/480/600 V / 3-PH
32/31/27/13/13 A
CE 380/400 V / 3-PH
15.5/15 A
Output current 20 – 65 A
Duty cycle @ 40° C (104° F) CSA 50% @ 65 A / 230 – 600 V / 1/3-PH
40% @ 65 A / 200 – 208 V / 1/3-PH
100% @ 46 A / 230 – 600 V / 1/3-PH
CE 50% @ 65 A / 380/400 V / 3-PH
100% @ 46 A / 380/400 V / 3-PH
Open circuit voltage (OCV) CSA 295 VDC
CE 270 VDC
Dimensions with handles 19.7'' (500 mm) D; 9.2'' (234 mm) W;
17.9'' (455 mm) H
Weight with 25' (7.6 m) torch CSA 64 lbs (29 kg)
CE 57 lbs (26 kg)
Gas supply Clean / dry / oil-free air or nitrogen
Recommended gas inlet flow rate / pressure Cutting: 400 scfh / 6.7 scfm (189 l/min) @ 85 psi (5.6 bar)
Gouging: 450 scfh / 7.5 scfm (212 l/min) @ 70 psi (4.8 bar)
Input power cable length 10' (3 m)
Power supply type Inverter – IGBT

Engine-driven generator operation

Engine drive rating (kW) System output (amps) Performance(arc stretch)
15 65 Full
12 65 Limited
12 40 Full
8 40 Limited
8 30 Full

Cut chart

  Thickness Thickness Current Maximum cut speed¹ Maximum cut speed¹
Material (inches) (mm) (amps) (ipm) (mm/min)
Mild steel 10 GA 3 45 205 5000
Mild steel 1/4 6 65 145 3900
Mild steel 1/2 12 65 50 1430
Mild steel 3/4 19 65 24 610
Mild steel 1 25 65 13 350
Stainless steel 10 GA 3 45 168 4200
Stainless steel 1/4 6 65 120 3800
Stainless steel 1/2 12 65 40 1150
Stainless steel 3/4 19 65 19 490
Aluminum 1/4 6 65 190 5500
Aluminum 1/2 12 65 60 1660
Aluminum 3/4 19 65 30 770

¹ Maximum cut speeds are the results of Hypertherm’s laboratory testing. For optimum cut performance , actual cutting speeds may vary based on different cutting applications. Refer to the operator manual for more details.

Operating Data

  Thickness Minimum cut speed
  Handheld cut capacity Handheld cut capacity
Recommended 3/4'' (19 mm) 20 ipm (500 mm/min)
Recommended 1'' (25 mm) 10 ipm (250 mm/min)
Severance 1-1/4'' (32 mm) 5 ipm (125 mm/min)
  Mechanized pierce capacity Mechanized pierce capacity
  1/2'' (12 mm)
Metal removal rate Groove profile
Gouge capacity Gouge capacity
10.7 lbs. (4.8 kg) per hour .14'' (3.5 mm) D x .26'' (6.6 mm) W

Ordering Information

Standard configurations

Below are some of the most common system configurations which include a power supply , torch and work
cable. Additional configurations are listed on our website.

Input voltages Handheld systems

Standard power supply

H65 torch

7.6 m (25')
Handheld systems

Standard power supply

H65 torch

15.2 m (50')
Handheld systems

Power supply with CPC port and selectable voltage ratio

H65 torch

7.6 m (25')
Handheld systems

Power supply with CPC port and selectable voltage ratio

H65 torch

15.2 m (50')
Mechanized systems

Power supply with CPC port and selectable voltage ratio

M65 torch

7.6 m (25')
Mechanized systems

Power supply with CPC port and selectable voltage ratio
M65 torch
15 m (50')
200 – 600 V CSA² 083270 083271 083275 083276 083277 083278
400 V CE³ 083279 083280 083284 083285 083286 083287

² For use in the Americas and Asia , except China.
³ For use in countries that require CE , CCC or GOST marks.

Custom configurations (select power supply, torch, work cable and other components)

Power supply options

  Standard power supply Power supply with CPC port and selectable voltage ratio Power supply with CPC port and selectable voltage ratio and serial interface port (RS-485)
200 – 600 V CSA 083234 083266 083267
400 V CE 083235 083268 083269

Component options
Cable length Torches

H65
Torches

H65s
Torches

M65
Torches

M65m
Work cables

Hand clamp
Work cables

C-style clamp
Work cables

Magnet
Work cables

Ring terminal
Control cables

Remote pendant
Control cables

CNC spade plug⁴
Control cables

CNC spade plug⁵
10' (3 m) 083246 083250
15' (4.5 m) 083254 083259
25' (7.6 m) 083247 083251 083255 083260 223125 223194 223197 223200 128650 228350 023206
35' (11 m) 083256 083261
50' (15 m) 083248 083252 083257 083262 223126 223195 223198 223201 128651 228351 023279
75' (23 m) 083249 083253 083258 083263 223127 223196 223199 223202 128652

⁴ For use with automation equipment that requires divided arc voltage.
⁵ For use when divided arc voltage is not required.


Torch Consumable Parts

Nozzles and electrodes are available in various quantities. Contact your distributor for more information.
Consumable type Torch type Amperage Nozzle Shield/Deflector Retaining cap Electrode Swirl ring
Drag-cutting Hand 45 220941 220818 220854 220842 220857
Drag-cutting Hand 65 220941 220819 220854 220842 220857
Mechanized Machine 45 220941 220817 220854 or 220953 (Ohmic) 220842 220857
Mechanized Machine 65 220819 220817 220854 or 220953 (Ohmic) 220842 220857
Unshielded Machine 45 220941 220955 220854 220842 220857
Unshielded Machine 65 220819 220955 220854 220842 220857
FineCut® Hand 45 220930 220931 220854 or 220953 (Ohmic) 220842 220947
FineCut® Machine 5 220930 220931 220948 or 220953 (Ohmic) 220842 220857
Gouging Hand 220797 220798 220854 220842 220857
Gouging Machine 220797 220798 220854 220842 220857


Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version