- Home
- Latest News
- TRACK WELDING CARRIAGE RAIL BULL
TRACK WELDING CARRIAGE RAIL BULL
LAST UNIT OFFER!!!
Overview
Rail Bull is suitable for work in both horizontal and vertical positions
The Rail Bull welding carriage is supplied in a metal box including:
- welding carriage
- metal box
- cross slide assembly
- short rod torch holder with clamp
- cable anchor power cord 3 m (10 ft)
- arc ignition cable of 6.5 m (21 ft) 3 mm hex wrench
- 4 mm hex wrench
- operator’s manual
Specification
Voltage | 1~ 115–230 V ; 50–60 Hz |
Power | 100 W |
Welding positions – Horizontal | PA (flat) & PB (horizontal vertical) & PC (horizontal) |
Welding positions – Vertical | PF (vertical up) & PG (vertical down) |
Minimum track curvature radius | 5 m (16 ft) |
Torch type | MIG/MAG |
Torch diameter | 16–22 mm (0.63–0.87’’); up to 35mm (1.38”) option |
Minimum workpiece thickness | 5 mm (0.20’’) |
Horizontal pulling force | 350 N |
Vertical pulling force | 150 N |
Cross slide adjustment range | 0–35 mm (0–1.38’’) up-down & left-right |
Horizontal speed | 0–120 cm/min (0–47.2 in/min) |
Vertical speed | 0–110 cm/min (0–43.3 in/min) |
Oscillation type | linear |
Oscillation path | trapezoid ; triangle ; straight line |
Oscillator arm stroke | 0–100 mm (0–3.9’’) |
Oscillation width | 0–50 mm (0–1.9’’) |
Oscillation speed | 0–1500 mm/min (0–59.0 in/min) |
Oscillation delay at center and on ends | 0–5 s |
Maximum oscillator pulling force | 100 N |
Weight | 20 kg (44 lbs) |
Dimension for Rail Bull:
Published : 25-Apr-2020